10/10/2019 Cms Lite Dvr Software Nuvico Camera Viewer
Digital Video Recorders; AP-C1605 from NUVICO Sign in to follow this. AP-C1605 from NUVICO. Has GREAT remote software and a heavily loaded web interface, priced right, 3-year warranty. Load the viewer manually from their website and you should be OK. Also looking at this DVR for an upcoming project but I'm guessing their. The Digimerge CMS-DH software is common to the entire line-up of DH Touch DVRs including the DH200+ as well as the 100, 230 and 250 series. The powerful CMS software. NUVICO Connecting Video Anywhere 1 How to connect NUVICO DVR to the internet Section 1.
DVR Client Software CD 4. Power Adapter with cord 5. Two AAA Batteries 6. This Instruction Manual If any of these materials are missing, please contact your vendor or NUVICO Customer Service immediately at (866) 523 - 1700. Revision 1.0. NUVICO makes no warranties for damages resulting from corrupted or lost data due to a mistaken operation or malfunction of the Digital Video Recorder, the software, the hard drives, personal computers, peripheral devices, or unapproved/unsupported devices. Do not make any changes or modifications to the equipment unless otherwise specified in the manual.
If such changes or modifications should be made, you could be required to stop operation of the equipment. 53 Smith Street, Englewood, NJ 07631 Tel: (866) 523-1700. This Digital Video Recorder’s warranty is only effective in the country of sale. If a problem arises while the DVR is in use abroad, please convey it back to the country of sale before proceeding with a warranty claim to NUVICO customer service. SAFETY PRECAUTIONS Before using the Digital Video Recorder, please ensure that you read and understand the safety precautions described below. Always ensure that the Digital Video Recorder is operated correctly.
The safety precautions noted on the following pages are intended to instruct you in the safe and correct operation of the DVR and its accessories to prevent injuries or damage to the self, other persons and equipment. CAUTION.
CAUTION “Risk explosion if replaced with a battery of an incorrect type. Dispose of used batteries according to instructions. The socket-outlet shall be installed near the equipment and shall be easily accessible. Avoid using, placing or storing the equipment in places subject to strong sunlight or high temperatures, such as the greenhouse or trunk of a car. TABLE OF CONTENTS CONTENT VERIFICATION.0 DISCLAIMER.1 FCC NOTICE.2 CANADIAN RADIO INTERFERENCE REGULATIONS.2 READ THIS FIRST.3 TEST SESSIONS. 3 THE PRIVACY ACT OF 1974(5 U.S.C. § 552a).3 WARRANTY LIMITATIONS.3 SAFETY PRECAUTIONS.
USB / CD-DVD BACKUP. MCD PLAYER.32 4. PAN / TILT / ZOOM CONTROL. 33 4.1 FOCUS CONTROL.
34 4.2 IRIS CONTROL.34 4.3 PRESET & TOUR.34 4.4 CUSTOM FUNCTIONS.34 4.5 AUTO PAN / AUTO TILT / PATTERN / POWER. 7.1.1 CONFIG.54 7.1.2 IP ADDRESS / NETMASK / GATEWAY. 54 7.1.3 DNS SERVER. 54 7.1.4 PORT.54 7.1.5 AUTO PORT.
![]()
54 7.1.6 STATUS.54 7.2 EMAIL. 55 7.2.1 USE.55 7.2.2 SMTP SERVER OPTION.55 7.2.3 EMAIL ADDRESS. DIGITAL VIDEO RECORDER LAYOUT 1. FRONT PANEL LAYOUT 1. CD / DVD DISC TRAY The tray to insert the blank media. CD-R or DVD-R for backup (copy). EJECT BUTTON This button is used to eject the disc tray.
DISPLAY BUTTON This button is used to switch between multi-view mode or single view mode. ENTER BUTTON This button selects and enables the configuration changes made on the menu and sub-menu screens. / SEARCH BUTTON This button is used to access the Time Search menu.
It is also used to select options from various menus. REAR PANEL LAYOUT NOTE: 16-ch shown 1. VGA OUTPUT: RGB Connector for main VGA output. HDMI OUTPUT: HDMI Connector for main HDMI output. USB PORT: USB port is used for a mouse or USB flash drive. LAN PORT: 10/100 Base RJ45 Ethernet port for network connection. IR REMOTE CONTROLLER POWER DVR ID DISPLAY RELOCATION TIME SEARCH INFORMATION BACK UP DISPLAY MODE PAN/TILT/ZOOM ENTER CANCEL / OSD OFF ZOOM MENU - BUTTON REWIND + BUTTON FAST FORWARD STOP SCHEDULE REC ON/OFF PLAY RECORD STEP NUMBERS & ALPHABET 4.
MOUSE OSD This DVR can be controlled using the mouse. Connect the mouse to the USB port located at the front / back panel of the DVR before use.
Clicking the right mouse button during Live mode or Playback mode will display the following virtual remote controller and virtual keypad. Using the mouse OSD, you may enter the PASSWORD or Camera Name. SYSTEM CONFIGURATION - 14. QUICK SETUP GUIDE This document is intended for initial setup only. The user should read the entire instruction manual before using this product. To start the setup process, start by pressing the MENU button located on the front panel of your DVR or on the remote control. RECORD SETUP RECORD Record menu allows customization of continuous record setting.
Use the + or - button on the DVR or remote controller to change these settings. RATE Adjust the recording rate of each camera NOTE: Max.
Global Record Rate: 120pps@360x240 (CIF), 60pps@720x240 (Field), 30pps@720x480 (Frame). Note: If you are using a dynamic IP internet service, hostname can be used to connect to the DVR. Hostname can be found under the “INFO” tab in the “SYSTEM” menu. I.e., INTERNET EXPLORER: hostname.dvrhost.com:port# NUVICO CMS Lite S/W: hostname.dvrhost.com:port#. (For example: Y123456.dvrhost.com:7000) 7. LOGIN CMS Lite Login: 3. Internet Explorer Login: 4.
Enter the IP address or hostname of the DVR in the address pane of the Internet Explorer. (For example: 192.168.0.100:7000, 5. Sign-in as either “admin” or “user”.
Enter the factory default password of 000000. BASIC OPERATION This section covers the basic features of the DVR, such as simple recording and playback. It will also explain the various alerts, operational, channel, DVR status, the time, and the hard drive space counter on the main screen. The section 2 will address the available features of the Live View which includes, automatic sequencing, display relocation, and the digital zoom. LIVE VIEW The live view displays each channel at 30 frames per second in NTSC video type. 2.1 FULL SCREEN DISPLAY Select any camera for full screen display by pressing the number button of the desired camera. 2.2 AUTOMATIC SEQUENCE Please refer to Section IV.
2.3 DIGITAL ZOOM During the Live View mode or during playback, it is possible to zoom-in to a section of the screen to get a close-up view of the section. To activate the digital zoom, select the full screen display. Press the ZOOM button to bring up the zoom window. LOG The log chart keeps record of all the events and alerts, 8 logs per page. The DVR keeps log from the initial power on of the DVR.
The record of items are compiled and listed in five categories. 3.1 ALL All events related to the operation and alerts of the DVR are listed and sorted under ALL, in chronological order. 3.3 NETWORK Any network activity is listed and sorted under NETWORK in the same chronological order. 3.4 ALARM Any alarm activity is listed and sorted under ALARM in the same chronological order. 3.5 MOTION Any motion activity is listed and sorted under MOTION in the same chronological order. BASIC RECORDING The DVR comes pre-set from the factory, and immediate recording is possible. Initiate recording by pressing the record button after the DVR has been properly installed.
Normal recording setting is used by default. There are three recording settings available in the DVR: continuous recording, alarm recording, and schedule recording. PLAYBACK 5.1 TIME SEARCH Press the SEARCH or TIME SEARCH button to access the time search calendar. Use the directional buttons to navigate to the desired date, and then press the ENTER button to access selected date. Use the directional buttons to navigate to the desired hour and minute slot. 5.2 PLAYBACK CONTROL BUTTONS During the playback, the DVR may be played back in reverse, paused, speed search up to 16 times the normal speed, or move picture by picture using the remote controller.
Please refer to the following illustrations for a detailed description. If the DVR is recording, then the DVR will return to the live screen, but it will display the REC icon on the upper left corner. During Playback, the playback control button allows the recorded data to be viewed picture-by-picture, fast forwarded, or fast rewound to the desired segment.
Press the FAST REVERSE button to rewind to the desired location. The same speed increment and icon concept is applied as it is for the fast reverse. 5.3 AUDIO PLAYBACK The DVR offers 1 channel of audio output. The audio, if recorded, is played back automatically when in single channel view mode. 5.4 LOG SEARCH The logs can be used to search and review directly to a point in time of the recorded data.
Alarm, motion, video loss and system related logs can be searched and played back directly from the time of the incident. Video Loss related logs will start the playback in single channel view mode. The illustration to the left has selected a log from the VIDEO LOSS tab. Alarm or motion related playback will display according icons during the playback. The illustration to the left is playing back channel 2, and is displaying the motion icon, showing that channel 2 was recorded based on the motion trigger. ADVANCED OPERATION 1.
GENERAL This section will cover advanced features of the DVR. This instruction manual will assume that the section on basic operation has been read and understood. The advanced operation will require occasional references to some of the features explained in the Advanced Settings section. This section will address the backup function, the motion and alarm recording and its combinations, Pan/Tilt/Zoom camera control and time search. MCD PLAYER Channel Select Display Select Capture Playback Watermark Check Status Progress Bar Upon Backup, MCD Player gets copied into the DVD or USB flash drive automatically.
There is no need to install separate software to view the clips. For advanced playback options, please use the CMS Lite Software. PTZ related operation.
When HELP button (ENTER on remote controller) is pressed, HELP GUI (Graphic User Interface) will be displayed as above: Note: Some buttons and functions only work with NUVICO PTZ models in NUVICO protocol. 4.1 FOCUS CONTROL Button Function Focus Out; F1 on remote controller Focus In; F2 on remote controller Auto Focus; F3 on remote controller 4.2 IRIS CONTROL Button Function Iris Close; TIME SEARCH on remote controller Iris Open; EXT. SEARCH on remote controller Auto Iris. 4.5 AUTO PAN / AUTO TILT / PATTERN / POWER Button Function Auto Pan; STOP on remote controller (Supported on certain European PTZ Camera) Auto Tilt; REW on remote controller (Supported on certain European PTZ Camera) Run Pattern; PLAY on remote controller Power On/Off.
ADVANCED RECORDING This section will cover the Advanced Recording of the DVR. It will explain advance recoding features such as of alarm, motion and schedule recording. Unlike the continuous recording mode which records 24 hours a day and seven days a week based on the same settings, these three recording options provides the user the flexibility of customizing the record settings, thus making the most of the hard disk drive usage. 5.2 MOTION RECORDING Please verify that the motion option has been enabled under RECORD SETUP menu.
Also, verify that the settings for motion grids, motion sensitivity level and record time have been configured under the CAMERA or DEVICE menu. The motion grids are all activated by default, thus, unless it has been deactivated, the motion grid setting may be ignored. 5.3 SCHEDULE RECORDING Schedule recording processes the recording schedule configured from the SCHEDULE menu.
Please note that if there are no schedules configured, then the DVR will not record. Please refer to Section SETUP for setting up schedule recording. Press the SCHEDULE button to start recording based on the preconfigured schedule. 5.4 COMBINATION RECORDING If a need arises to record a combination of continuous, motion, alarm and scheduled recording, then the DVR can be configured so that all four features are used in conjunction with one another. Please make sure that the Record Rate is set to ON (1F/S 30F/S) from the RECORD Menu.
5.4.1 CONTINUOUS RECORDING with MOTION / ALARM RECORDING For instances where a location needs to be recorded 24 hours a day seven days a week at a minimal recording speed, but the requirement is to record at higher recording speed in case of a motion /. 5.4.2 SCHEDULED RECORDING with MOTION / ALARM RECORDING For instances where a location needs to be recorded at a predetermined schedule, but also needs to record in case of motion / alarm triggers.
Both schedule and event (motion / alarm) recording can be used in conjunction to meet the requirement. SETUP Press the MENU button to access the main menu (SETUP) for the advanced settings of the DVR. The Factory Default password is “000000” (6 zeros).
The menu will display the following categories: Directional buttons are used to navigate through all the main categories and their submenus. ENTER button is used to access and save the settings and exit out of the submenus. DISPLAY DISPLAY menu allows the user to customize a variety of options related to the main display of the DVR. It allows the display of the STATUS BAR, the channel number and the camera title, selection of border line and background colors, and the sequential display of display modes. 1.1 DISPLAY SETUP 1.1.1 STATUS BAR Select the display of the status bar containing various USB, client connection, date &. 1.2 SEQUENTIAL SETUP 1.2.1 DWELL TIME Select the sequence delay time. Available delay time is from 1 second to 30 seconds per display.
MODE Select what display modes to include in sequenced display. Single, quad, 6, 7, 8, 9, 10, 13 and 16 channel view modes can be included in the sequential display mode.
CAMERA CAMERA menu allows the user to customize the display parameters of each channel, such as the brightness, contrast, color, sensitivity, motion grid, channel title and the PTZ camera associated. 2.1.1 CAMERA SELECTION Select the camera that needs to be modified or adjusted. 2.1.2 BRIGHTNESS Adjust the brightness using –. 2.1.7 COVERT Select between covert mode (YES) and normal mode (NO).
If covert mode is activated, the activated camera’s display will be hidden on the monitor. However, the video is still being recorded. When Admin is connected using the CMS Lite software, Admin will be able to view the images but not the User. Preset Preset Tour Auto Auto Pattern Camera Esc/ Speed Model Name Save Tilt Menu Enter NUVICO, NV 9600 BPS MERIT LILIN, PIH-7000/7600 VCL, Orbiter Microsphere SAMSUNG, SCC-641 NEC, NC-21D SUNKWANG, SK2107 RESERVED D-MAX, PTZ PROTOCOL LG, LPT-A100L P/T/Z HONEYWELL, GCC-655N. RECORD RECORD menu allows customization of continuous record settings. The usage of camera, record quality as well as record rate, motion / alarm record options are available.
3.1.1 RATE Adjust the record rate for each camera. Note that the maximum global record rate is 120 pictures per second at the resolution of 320 x 240 (CIF), 60 pictures per second at the resolution of 720 x 240 (Field), and 30 pictures per second at the resolution of 720 x 480 (Frame). SCHEDULE Schedule setup configures a variety of timed recording settings to provide a fully automated recording option. Four additional recording groups are available in addition to MOTION and ALARM recording. Note: Remember to activate the schedule by pressing the Schedule button on the front panel after all the values have been entered. 4.3 EXAMPLE A store owner needs to record from 10am through 8pm every day of the week using continuous recording. Additionally, the owner needs to record during his non-business hours using motion detection to conserve the space on his hard disk drive.
The owner wants to record at 30 pictures per second during his business hours and 10 pictures per second during his non-business hours. The CHART will display the schedule for all days of the week, MODE 1 recording from 10am through 8pm and MODE 2 recording from 8pm through 10am.
Select MODE 1 and adjust the settings accordingly. Select MODE 2 and adjust the settings accordingly. EVENT EVENT menu allows customization of motion and alarm recording options. It includes motion / alarm record settings as record rate and picture quality. 5.1 MOTION 5.1.1 RATE Adjust the motion record rate for each camera. Note that the maximum global record rate is 120 pictures per second at the resolution of 320 x 240 (CIF), 60 pictures per second at the resolution of 720 x 240 (Field), and 30 pictures per second at the resolution of 720 x 480 (Frame). DEVICE DEVICE menu allows customization of device related setting.
It includes post record time, audio record, keypad model, key tone, key sensitivity, and alarm related options. 6.1 GENERAL 6.1.1 POST RECORD TIME POST RECORD TIME determines the amount of the time the DVR records after the initial events trigger (motion or alarm). 6.2 ALARM 6.2.1 RECORD CAMERA Record camera provides the option of two distinct recording modes when an alarm trigger occurs:. ALL: Any alarm trigger will force all channels to record. 1:1: The channel from which an alarm trigger occurred will record. 6.2.2 ALARM BUZZER The DVR emits a high pitched, continuous buzzer when the alarm is triggered and starts to record. NETWORK The DVR utilizes widely available broadband internet connections such as T1, Cable, and DSL to allow remote access, monitoring and control of the DVR in a relatively reliable manner.
7.1 IP SETUP 7.1.1 CONFIG Select from the two types of available IP address types:. 7.2 EMAIL 7.2.1 USE Select between Off, Default or SMTP for your e-mail notification option. Off: DVR does not send e-mail notification. Default: DVR sends e-mail notification through dvrhost.com. SMTP: DVR sends e-mail notification through private or user’s e-mail server. 7.2.2 SMTP SERVER OPTION Enter the SMTP SERVER address, port, authorization, user ID, or password, if SMTP SERVER option is selected.
7.5 CONFIGURING THE DVR WITH A ROUTER INTO A LAN The majority of any network will often consist of a single IP address which shares the internet access through a router. This IP address may be any external (public) static IP address or any dynamic IP address issued by the Internet Service Provider. Click on Application & Gaming tab to access port forwarding configuration page. Enter the three designated port: 7000 for the DVR. Point each port to the DVR.
Illustration shows that the DVR’s IP address being 192.168.1.251. In the following examples, DVR7000 was used. Make sure you enable the port forwarding. Port 7000 is added as shown. 7000 download section, choose a product, and download the firmware file listed. Unzip the file and then Copy.img file to your USB flash drive. Make sure that the files are placed on the root of the drive and not inside of a folder.
8.6 INFO 8.6.1 INFORMATION The information screen displays the basic information about the DVR. Press MENU to access the main setup window, and then select SYSTEM to access system setup. When the MENU button is pressed, a prompt for the password will appear.
You can also access the INFO by pressing INFO button form the Remote Control. Note: DirectX 9.0 version is recommended for CMS Lite.
INSTALLING CMS LITE Insert the program CD into the CD-ROM or DVD-ROM drive of the computer and locate the NUVICO CMS Lite InstallerXXXXX.exe. The Xs represent the version number of the program. Double- click on the file, which opens the setup dialog.
Shortcuts may be unchecked if desired. Click on Next to continue. Select the folder in which the program will be installed. By default, it is installed in “C: Program Files NUVICO CMS LITE.” Click on Install and the installation will begin. Click on Close to finish the installation. EXECUTING CMS LITE Double-click on the CMS Lite icon and the initial log-in screen will appear illustrated in below.
CMS Lite Login: 1. Enter the IP address of the DVR or the hostname and Port number.
(For example: 192.168.0.100:7000, or Y123456.dvrhost.com:7000) 2. CMS Lite Locate the CMS Lite icon from the desktop and double-click on it, or locate the CMS Lite icon in Start – Programs – NUVICO CMS Lite. 4.1 MAIN CAMERA DISPLAY WINDOW Live or playback video is displayed up to 16 cameras in the main window. When the actual video is displayed, it will display the channel number and title as well as the frame rate. 4.4 FILE OPEN Open any downloaded or saved images from CD/DVD for playback.
4.5 CAPTURE AND PRINT Take a snapshot of the live or playback video. These images can be saved in JPEG or BMP file format. In addition, you can print the image from your local printer. CMS LITE – LIVE MODE 5.1 LIVE DVR MONITORING 1.
Displays the Camera Title 2. Displays the Local Time of the DVR.
Displays DVR Status:. REC: Normal Recording. Wait: Initial Connection. Loss: Video Loss. Close: Disconnected from the DVR. CMS LITE – PLAYBACK MODE Click on the Mode Selector button to switch to Playback Mode. Select Channel During the remote or local playback, any camera can be accessed and viewed in single channel view mode by clicking on any camera number.
The same can be done by double-clicking on any channels. 6.1 SEARCH 1.
Year and Month 2. Recorded Video Category. Displays different types of recording for each hour and minute slot:. Yellow: Normal Recording. Green: Motion Recording. Red: Alarm Recording. Play and Download.
6.3 REMOTE PLAYBACK Select the date and the time. Click on PLAY to begin the remote playback. The Hour, Minute and the Clip can be clicked at any time to move backward or forward in time. You can also change the speed of the playback.
6.4 DOWNLOAD The file selection process is just as selecting a slot for remote playback. To download the file, click on Download instead of Play. Once the download is complete, “Download Complete” will be displayed. 6.5 LOCAL SEARCH Click on Local Search Icon. 6.6 LOCAL PLAYBACK Select the date and the time. The Hour, Minute and the Clip can be clicked at any time to move backward or forward in time.
You can also change the speed of the playback. DVR SETUP The DVR Setup allows modification of all system settings through CMS Lite as it would be done accessing the DVR menu screen. Please refer to Section IV SETUP for explanation of the Setup. INTERNET EXPLORER LIVE VIEW Web CMS is a CMS software that run over Internet Explorer. It is extremely convenient since the user does not need to install dedicated CMS software in the PC. The function is exactly same as CMS except that WEB CMS does not support Download. If connecting to the unit for the first time, click on Install ActiveX Control so that the plug-in are loaded.
Click on Install. When the Image Loading is done, the images should appear. Notes This page intentionally left blank.
Notes This page intentionally left blank.
Minimum System Requirements Live CH Request Up to 32CH Up to 64CH Up to 96CH CPU Celeron CPU J1900 or above Intel core i7 3770 or above Intel core i7 3770 or above RAM 4GB or above 8GB or above 16GB or above Graphics Card Intel HD4000 or above GTX1050 2G or above GTX1050 2G or above Hard Drive Type at least 500GB space Architecture Total number of servers in the distributed system 1 1 1 or above Total number of Liveview 32 64 96 (For channels over 40, dual monitors are needed.) Multiple monitor display 1 Monitor 4 Monitors Max. 8 Monitors Max. Video Viewer for Mac Version: 0.7 Minimum PC Requirement:. OS: Mac OS 10.6x, 10.7x, 10.8, 10.10. CPU: Intel processor.
RAM: 1GB Video Player Version: 1.9 Video Player is used to play the video clips downloaded from recorder or microSD card. CENTRAL MONITORING Display Mode 1CH / 4CH / 6CH / 9CH / 16CH Selectable 1CH / 4CH / 6CH / 9CH /16CH Selectable Display Mode Setting Adjustable Sequence & Channel Display Position Adjustable Sequence & Channel Display Position Max.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |